Basic Info.
Model NO.
PC600*400
Finished Surface
Gear Process
Certification
CE, ISO
Condition
New
Color
Yellow
Model Number
PC800X600
Capacity(T/H)
15-30
Object
Iron Ore
Principle
Cylinder Culling
Name
Hammer Crusher
Transport Package
Standard Container
Specification
ISO9001-2008
Trademark
HengXing
Origin
Zhengzhou, China
HS Code
84742090
Production Capacity
15-30t/H
Product Description
PC 600*400 Rock Salt Hammer Crusher:
Hammer crusher
A hammer crusher(hammermill) crushes material that is friable, by impacting it against a rotating hammer (typically traveling between 750 RPM and 1800 RPM). Then the material is forced against a rugged solid plate called a "breaker plate" which further degrades the particle size. Finally, the material is forced over a discharge grate by the hammers, where crushed finer particles drop through the discharge grate and larger particles travel around for another crushing cycle, until they fall through the discharge grid. During the entire time the material is traveling around in the hammermill it is constantly being impacted by the hammers, and the side of the mill casing, causing breakage of the particles. This sequence repeats itself between 750 - 1800 times each minute, until the particle is ground fine enough to fall through the discharge grid.
Hammer crusher
A hammer crusher(hammermill) crushes material that is friable, by impacting it against a rotating hammer (typically traveling between 750 RPM and 1800 RPM). Then the material is forced against a rugged solid plate called a "breaker plate" which further degrades the particle size. Finally, the material is forced over a discharge grate by the hammers, where crushed finer particles drop through the discharge grate and larger particles travel around for another crushing cycle, until they fall through the discharge grid. During the entire time the material is traveling around in the hammermill it is constantly being impacted by the hammers, and the side of the mill casing, causing breakage of the particles. This sequence repeats itself between 750 - 1800 times each minute, until the particle is ground fine enough to fall through the discharge grid.
Hammer crusher Working Principle
The main working part of Hammer Crusher is the rotor with hammers. The rotor consists of main shaft, disk, hinge pin and hammers. A sieve plate is below the rotor. The motor drives the rotor to rotate at a high speed. When the materials get into the crushing cavity, they are crushed by the rotating hammers, the crushed products which meet the required size can be discharged from the sieve plate and become the final products, the products with larger size are brought back to the crushed area for being re-crushed until they reach the required size.
Hammer Crusher Working Prnciple:
Hammer Crusher Working Prnciple:
| Model | Rotor speed (r/min) | Input opening size(mm) | Max. feed size (mm) | Discharged Size (mm) | Capacity (t/h) | Power(kw) | weight (t) | Overall Dimension (L×W×H) (mm) |
| Φ400×400 | 1500 | 145×450 | 100 | 0-30 | 5-8 | 7.5 | 0.9 | 844×942×878 |
| Φ600×400 | 1000 | 295×450 | 100 | 0-35 | 10-12 | 18.5 | 1.03 | 1054×972×111 |
| Φ600×600 | 1000 | 295×570 | 100 | 0-35 | 12-18 | 45 | 2.14 | 1315×840×150 |
| Φ800×600 | 1000 | 350×570 | 120 | 0-45 | 20-25 | 55 | 2.45 | 1515×2586×10 |
| Φ800×800 | 1000 | 350×850 | 120 | 0-45 | 35-45 | 55 | 3.05 | 1515×2831×10 |
| Φ1000×800 | 1000 | 580×850 | 200 | 0-45 | 25-40 | 110 | 6.5 | 3206×2210×15 |
| Φ1000×100 | 1000 | 580×1060 | 200 | 0-45 | 40-80 | 132 | 7.6 | 3514×2230×15 |
| Φ1250×800 | 750 | 650×850 | 200 | 0-45 | 20-50 | 132 | 11.7 | 2630×1780×20 |
| Φ1250×125 | 750 | 650×1330 | 200 | 0-45 | 90-110 | 185 | 13.2 | 2630×2180×20 |
| Φ1400×140 | 750 | 1050×154 | 250 | 0-45 | 120-170 | 280 | 17.2 | 2790×2800×23 |
| Φ1600×160 | 600 | 1500×178 | 350 | 0-60 | 220-280 | 450 | 22.8 | 3350×3120×26 |
Contact:
Sara Pang
Mobile phone 0086137 8347 1727