Naipu NP-AH(R) series centrifugal slurry pumps and spare parts can fully interchangeable with world famous brand. These pumps are of heavy duty construction, designed for continous pumping of highly abrasive and corrosive slurries. They feature a wide choice of replaceable abrasion resistant metal or molded elastomer casting liners and impellers, which are all interchangeable within a common casting assembly.
|Type||Allowable Mating Max. Power(Kw)||Clear Water Performance||Impeller|
|Material||Capacity/Q m³/hr||Head/m|| peed|
|Max Eff%||NPSH/m||Nos of Vane||Impeller Diameter/|
1. NP-ZJ series centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
The products are widely used in mining, power, metallurgy, coal, dreading, building material and other Industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Chemical Medium Processing
Sand And Gravel Handling
We are factory of Slurry Pumps ,Sand Gravel Pumps,Dredging Pumps etc.
We have Mould Workshop,Casting Workshop,Machining Workshop,Testing workshop,and Assembly Workshop etc.
Our pumps can be 100% interchangeable with AH HH G SP L M series.
We also undertake OEM service if you supply us drawings or samples.
We have more than 30 inspectors,our pumps and parts do the testing before delivery.
Application On Site
The parts are widely used in Main Applications: Heavy Mining Mineral Processing Sand and Gravel Coal Prep Cyclone Feeds Aggregate Processing Fine Primary Mill Grinding Chemical Slurry Service Tailings Secondary Grinding Industrial Processing Pulp And Paper Food Processing Cracking Operations Ash Handling Pipeline Transport High Velocity Hydraulic Transport Food Processing Explosive Sludge In Metal Smelting River And Pond Dredging Heavy Refuse Removal Larger Particle Or Low NPSHA Applications Continuous (Snore) Sump Pump Operation Abrasive Slurries High Density Slurries Large Particle Slurries Sump Drainage Wash down Floor Drainage Mixing Iron Ore Cooper Diamond Alumina Coal Gold Kaolin Phosphorite Steel Palm Suger Chemical Power FGD Frac Sand Blending Construction City Sewage etc.
The Main pump model of AH HH M L SP AF G Series
|AH series||L(R), M||HH||SP(R)||G||AF Series|
|8/6R-AH(R)||10/8 E-M||8/6S-H||16/14 G-G|
Possible Faults and Settlements
|1.Pump fails to discharge any water,The hand of pressure gauge beat violently||1.Suction pipe don't have enough water.|
2.Suction pipe blocked or the valve is locked.
|1. Inject enough water|
2.unlock the inlet valve,clear the blocks
3.Exclude the air leakage
|2.The pump can't discharge water,the hand of vacuum meter beat heavily.||1.The inlet valve is unlocked or silted up.|
2.The resistance of suction pipe is too big or silted up.
3.The height of suction is too high.
|1.Unlock the valve or desilting |
2.improve the design of suction pipe or desilt
3.Lower the height of the installation.
|3.The pump can't discharge water,pressure gauge shows heavy pressure.||1.The resistance of the discharge pipe is too big.|
2.The impeller blocked
3.The speed is slow.
|1.Check and adjust the outlet pipe.|
2.Clear the impeller
3. Improve the speed.
|4.The pump doesn't rotate||The volute is silted up by the blocks.||Clear the blocks|
|5.The capacity is not enough||1.The blocks of the impeller or the inlet or outlet pipe.|
2.The abrasion of the impeller is heavily.
3.The speed is low to normal
4.Pump is installed unreasonably or the leakage of the inlet pipe.
5.The transporting height is too high,the loss of the resistance of the inside pipe are too big.
6.The inlet valve not open enough or blocked
7.The packing seal leaks
|1.Clear the impeller or pipe.|
2.Change the impeller
3.Adjust the speed
4.Install again or stop leaking.
|6.The motor of the pump is overloaded||1.The head of the pump exceeds the head of the working condition.|
2.Not consider the slurry density when selecting the pump.
3.The packing press tightly
|1.Turn down the outlet valve,cut the impeller or lower the speed.|
2.Select the motor again.
3.Adjust the the screw of the packing gland
|7.Abnormal sound in the pump, and no water out||1.The resistance of the inlet pipe is too big.|
2.The height of the suction is too high.
|8.pump vibrates||1.pump cavitate |
2.The block of the impeller single vane
3.The no concentricity between the pump shaft and motor shaft
4.Fasteners or foundation loose
|1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet.|
2.Clear the impeller
4.Fasten the screw,and reinforce the foundation.
|9.Bearing is overheat||1.lock the cooling water|
2.lubrication is not good.
3.the lubrication oil is not clear
4.the wrong direction of the thrust bearing.
5.there is something wrong with the bearing.
|10.Packing short life||The material of packing is not good||Change the packing|
|11.pump leak oil||1.High oil level|
2.The rubber parts invalid
|1.Lower the oil level|
2.Change rubber spares
3.Adjust the assembly
|12 Pump head leaking||1.The rubber parts not press well||Assembly again or press tightly|
Contact Person: Karen Tan
Please contact me freely if any questions!